Gnarly Sheen Refining Beard Oil
Double click for enlarge

Gnarly Sheen Refining Beard Oil

REFINING BEARD OIL

 

Gnarly Sheen Refining Beard Oil contains natural sunflower, sweet almond and avocado oils that keep your beard soft, shiny & smooth.

 

2 FL OZ / 60 ML

Quantity:
$24.00
ONE FREE 2OZ TRAVEL ESSENTIAL WITH ORDERS $30+
ONE FREE BJ KOOZIE WITH ORDERS $40+
FREE GIFT WRAPPING AVAILABLE

Take control of the situation.
Just 'cause every now and then you get a little out of control doesn’t mean your beard should do the same. Gnarly Sheen Refining Beard Oil contains natural sunflower, sweet almond and avocado oils that keep your beard soft, shiny & smooth. This nutrient-rich blend conditions both your beard and the skin underneath, helping eliminate itch and flakes.

Key Ingredients
  • Aloe Vera: Moisturizer; promotes skin healing and helps restore pH balance. Aids in preventing itching and flakes.
  • Sunflower Oil: Conditions hair, helps prevent breakage. High in gamma alpha lineolic acid (GLA) to volumize and thicken beard.
  • Sweet Almond Oil: Rich in Vitamins A, B & E. A natural emollient, it penetrates and strengthens the hair shaft.
  • Jojoba Oil: Easily absorbs into beard to hydrate, soften and condition. Helps repair damaged hair.
  • Avocado Oils: Easily absorbs into cuticle without weighing hair down. High in Vitamin E to strengthen hair shaft and prevent breakage. Contains natural antimicrobial properties.
Directions
Rub 2-3 drops into your palm and massage into your beard.
Glycine Soja (Soybean) Oil, Helianthus Annuus(Sunflower) Oil, Caprylic/Capric Triglyceride, Styrene/Butadiene Copolymer, Aloe Barbadensis Leaf Oil, Prunus Amygdalus Dulcis(Sweet Almond) Kernel Oil, Simmondsia Chinensis (Jojoba) Seed Oil, Persea Gratissima (Avocado) Oil, Tocopherol, Fragrance
The Whole Shebang
When using Gnarly Sheen Beard Oil with Beard Wash and Beard Control, try this procedure created by staff beard connoisseur, Blake Bennison:

1. Work a quarter-size amount of Billy Jealousy Beard Wash into a good lather and apply it to the soaking wet beard. Massage in circular motions for about 20 seconds before rinsing.
2. Towel dry and comb the beard before applying a dime to nickel-size amount of Beard Control. With your hands, work it evenly through the beard before combing through again to evenly distribute the product and lay down the hairs.
3. TWO DROPS OF OIL IS PLENTY! The most difficult part of getting guys to enjoy an oil is to getting them to use it in moderation. Two drops worked in evenly and combed through will give a really nice soft feel and just the right amount of shine without looking greasy.
Glycine Soja (Soybean) Oil, Helianthus Annuus(Sunflower) Oil, Caprylic/Capric Triglyceride, Styrene/Butadiene Copolymer, Aloe Barbadensis Leaf Oil, Prunus Amygdalus Dulcis(Sweet Almond) Kernel Oil, Simmondsia Chinensis (Jojoba) Seed Oil, Persea Gratissima (Avocado) Oil, Tocopherol, Fragrance
The Whole Shebang
When using Gnarly Sheen Beard Oil with Beard Wash and Beard Control, try this procedure created by staff beard connoisseur, Blake Bennison:

1. Work a quarter-size amount of Billy Jealousy Beard Wash into a good lather and apply it to the soaking wet beard. Massage in circular motions for about 20 seconds before rinsing.
2. Towel dry and comb the beard before applying a dime to nickel-size amount of Beard Control. With your hands, work it evenly through the beard before combing through again to evenly distribute the product and lay down the hairs.
3. TWO DROPS OF OIL IS PLENTY! The most difficult part of getting guys to enjoy an oil is to getting them to use it in moderation. Two drops worked in evenly and combed through will give a really nice soft feel and just the right amount of shine without looking greasy.
Glycine Soja (Soybean) Oil, Helianthus Annuus(Sunflower) Oil, Caprylic/Capric Triglyceride, Styrene/Butadiene Copolymer, Aloe Barbadensis Leaf Oil, Prunus Amygdalus Dulcis(Sweet Almond) Kernel Oil, Simmondsia Chinensis (Jojoba) Seed Oil, Persea Gratissima (Avocado) Oil, Tocopherol, Fragrance
The Whole Shebang
When using Gnarly Sheen Beard Oil with Beard Wash and Beard Control, try this procedure created by staff beard connoisseur, Blake Bennison:

1. Work a quarter-size amount of Billy Jealousy Beard Wash into a good lather and apply it to the soaking wet beard. Massage in circular motions for about 20 seconds before rinsing.
2. Towel dry and comb the beard before applying a dime to nickel-size amount of Beard Control. With your hands, work it evenly through the beard before combing through again to evenly distribute the product and lay down the hairs.
3. TWO DROPS OF OIL IS PLENTY! The most difficult part of getting guys to enjoy an oil is to getting them to use it in moderation. Two drops worked in evenly and combed through will give a really nice soft feel and just the right amount of shine without looking greasy.
Glycine Soja (Soybean) Oil, Helianthus Annuus(Sunflower) Oil, Caprylic/Capric Triglyceride, Styrene/Butadiene Copolymer, Aloe Barbadensis Leaf Oil, Prunus Amygdalus Dulcis(Sweet Almond) Kernel Oil, Simmondsia Chinensis (Jojoba) Seed Oil, Persea Gratissima (Avocado) Oil, Tocopherol, Fragrance
The Whole Shebang
When using Gnarly Sheen Beard Oil with Beard Wash and Beard Control, try this procedure created by staff beard connoisseur, Blake Bennison:

1. Work a quarter-size amount of Billy Jealousy Beard Wash into a good lather and apply it to the soaking wet beard. Massage in circular motions for about 20 seconds before rinsing.
2. Towel dry and comb the beard before applying a dime to nickel-size amount of Beard Control. With your hands, work it evenly through the beard before combing through again to evenly distribute the product and lay down the hairs.
3. TWO DROPS OF OIL IS PLENTY! The most difficult part of getting guys to enjoy an oil is to getting them to use it in moderation. Two drops worked in evenly and combed through will give a really nice soft feel and just the right amount of shine without looking greasy.
Glycine Soja (Soybean) Oil, Helianthus Annuus(Sunflower) Oil, Caprylic/Capric Triglyceride, Styrene/Butadiene Copolymer, Aloe Barbadensis Leaf Oil, Prunus Amygdalus Dulcis(Sweet Almond) Kernel Oil, Simmondsia Chinensis (Jojoba) Seed Oil, Persea Gratissima (Avocado) Oil, Tocopherol, Fragrance
The Whole Shebang
When using Gnarly Sheen Beard Oil with Beard Wash and Beard Control, try this procedure created by staff beard connoisseur, Blake Bennison:

1. Work a quarter-size amount of Billy Jealousy Beard Wash into a good lather and apply it to the soaking wet beard. Massage in circular motions for about 20 seconds before rinsing.
2. Towel dry and comb the beard before applying a dime to nickel-size amount of Beard Control. With your hands, work it evenly through the beard before combing through again to evenly distribute the product and lay down the hairs.
3. TWO DROPS OF OIL IS PLENTY! The most difficult part of getting guys to enjoy an oil is to getting them to use it in moderation. Two drops worked in evenly and combed through will give a really nice soft feel and just the right amount of shine without looking greasy.

More from this collection

(0) Items
Items 0
Subtotal $0.00
To Top